Periodic Event Actions are designed to trigger an action once per hour, daily, weekly or monthly. Under certain conditions it is possible for the action to trigger more than once.
If you edit and save an action that has already fired within the specified period, that action may trigger again. When you save the action, MassTransit reloads all the actions and re-initializes all of the time frames. Due to the re-initialization, MassTransit may detect that an action has not been triggered and it will trigger again.
Apple frequently publishes updates to Mac OS X. Occasionally these updates make changes to the web setup that can break the web interface for MassTransit. This article describes how to ensure that MassTransit functions properly after updating your Mac OS X installation.
MassTransit 6.0 supports having a MassTransit Server use a remote machine on the local area network for its MySQL databases. This article describes how to install and set up MassTransit with MySQL databases on a remote computer.
For information on how to configure MassTransit 7 with remote MySQL databases, please refer to MassTransit Administrator page.
From time to time you may need to repair or optimize your MassTransit databases. You can do so easily by using the MySQL Administrator that came with your MySQL installer package.
Optimizing For Windows
- Log in to the MySQL Administrator
- Select Catalogs
- Select the mtdatabase schema
- Highlight the table(s) you wish to optimize
MassTransit servers and clients may report an inability to connect to a remote destination that is configured to use an IP address reserved for private internets (networks).
Organizations that require network connectivity internally, but do not require network layer connectivity outside of that organization may choose to use IP addresses that have been reserved for private internets. As indicated in RFC 1918, the Internet Assigned Numbers Authority (IANA) has reserved three specific blocks for such private internets. These blocks include:
Why do I get the following error? TCP/IP Secure reports : error1407609C:SSL routines:SSL23_GET_CLIENT_HELLO:http request:s23_srvr.c:385: (6776)
This error can occur if your SSL protocols are not matched up. To verify these settings first check the SSL encryption level for Incoming calls on the MassTransit Server.
- From the MassTransit Administrator -
From within the MassTransit Administrator Administrator, the MassTransit Log appears to not contain any data.
In rare cases, the Log window in the MassTransit Administrator may appear to not contain any data. To repair the log function we recommend the following course of action:
When transferring files from a Mac to a MassTransit server using Firefox's built-in HTTP file transfer support (without the MassTransit Plug-in), you will be able to select two file types that cannot actually be transferred using HTTP. The affected types (.app and .pkg files) are considered "bundles" or "packages" on Mac OS X. They normally look like a single file but are essentially folders containing multiple related files.
This message primarily means that a TCP connection was initiated on a port that MassTransit was listening on (typically port 50000). After MassTransit has opened the socket, it begins to “probe” the remote destination for authentication. Here, it is determined whether the remote side is a legitimate MassTransit contact, and further, which contact is calling. If no information is passed during this “probing period,” the connection will eventually time out and produce this error message.
Yes, all MassTransit product types run natively on macOS as of version 4.2 to version 6.0.
The following describes macOS compatibility for other recent versions:
MassTransit Web Client
MassTransit Web Client versions 5.1 and later run natively on macOS.
MassTransit Servers in Compatibility Mode
Existing files in the original location are not overwritten with copies from Acronis Cloud.
- You want to restore some files from a backup in Acronis Cloud.
- You select the files to restore and a location where to restore these files. The location is not the original location of these files, but a new one.
- While restoring you see this error:
File with this name already exists.
- However, recovery destination folder does not contain these files.
This is a GUI issue. The issue will be fixed in future updates of Acronis True Image.
Acronis True Image supports macOS Sierra starting with Version 2017 Update 1 (build 5573). Update the product to the latest build.
If you are not sure, which build is currently installed on your machine, this article helps you find it out.
If you need assistance with installing the new build, this article provides you with step-by-step instructions.
We've had a number of questions recently about searching in Mac OS X 10.5.6.
As we explain in this knowledge base article, Apple introduced a bug in Mac OS 10.5.6 that causes it not to correctly send search requests.
Group Logic has been working with Apple and encouraging them to fix the problem in 10.5.7. We'll post an update as soon as we confirm that a fix is available.
The latest version of the Microsoft Office 2004 for Mac Resource Kit gives mention to Acronis Files Connect (formerly ExtremeZ-IP) File Server as an alternative to Microsoft's Services for Macintosh (SFM).
Acronis Files Connect versions 10.0.4 and later have been tested for compatibility with macOS 10.12 ‘Sierra’. If you are running an earlier version of Acronis Files Connect, please install 10.0.4 or later to support Sierra client Macs.
Can Acronis Files Connect (formerly ExtremeZ-IP) replace Cyan Software's MacServerIP which has not been upgraded to support Mac OS X 10.5 Leopard and Windows 2008 Server?
With Cyan's lack of upgrades and technical support for MacServerIP, Group Logic recognizes the need of customers for a supported, compatible AFP server solution on the Windows platform.
Is it possible to change my password from the Macintosh when using Acronis Files Connect (formerly ExtremeZ-IP) on my server? Are there any issues I should be concerned about?
How does Acronis Files Connect (formerly ExtremeZ-IP) use TCP/IP and Appletalk?
Acronis Files Connect use of AppleTalk is limited to broadcast and service discovery functions (we also support SLP and Bonjour).
Since Apple's newer AFP protocol provides a big performance advantage over AppleTalk, Acronis Files Connect uses TCP/IP over AFP for file sharing activities. We support AFP v3.1 for Mac OS X clients and AFP v2.2 for Mac OS 9 clients.
Problems binding various versions of Mac OS X clients to Active Directory are quite common. You can track down where in the binding process the plug-in fails by using the Terminal application.
Type the following commands in the Terminal from the machine that is having trouble with the ADPlugin:
I am using Mac OS 8.1 and when I view files on my Acronis Files Connect (formerly ExtremeZ-IP) server, the file sizes are incorrect. What's wrong?
This problem is a known bug with Mac OS 8.1 and AppleShare Client 3.8. It's actually the result of an undocumented portion of the AFP protocol.
Now that I've migrated from SFM to Acronis Files Connect (formerly ExtremeZ-IP), my Mac clients fail to auto-mount volumes. What's wrong?
The first thing to check is to look in the "Acronis Files Connect Administrator" program and see if the "Allow Workstations To Save Password" button is checked. If this is not checked, then workstations will not be able to log in at start up correctly. Turn this option on, then remount the servers from the clients and set up the auto-mounting again.
Searches may hang when typing slowly into the Mac OS X 10.4 Tiger search prompt.
Steps to Reproduce:
Select an Acronis Files Connect (formerly ExtremeZ-IP) mounted volume on a Mac OS 10.4 client and type any word into the search prompt with a second pause between each letter.
Acronis Files Connect (formerly ExtremeZ-IP) indexed searches on 'Name' with parameters "ends with," "begins with," and "is" do not return any results.
Steps to Reproduce:
Search on 'Name' with parameters "ends with," "begins with," and "is". You won't find anything.
This is a bug in Mac OS 10.4 Tiger and occurs in 10.4 - 10.4.2.
There is no workaround.
This bug is likely corrected in the Mac OS 10.4.3 update, which addresses multiple file search bugs.
A change Apple introduced starting with Mac OS X 10.6.7 has led to questions about file system archiving support for Macs. The bug was finally fixed in Mac OS X 10.8.2. This article explains the options for previous version of Mac OS X.
Why are my Intel Macs getting a Connection Failed 2 error?
This error only happens if you are connecting to Microsoft Services for Macintosh (SFM) using the custom Microsoft User Authentication Module (MSUAM). This issue does not affect Acronis Files Connect because it uses either the built-in DHX or Kerberos User Authentication Modules which work fine on the Intel Macs.
As noted in a previous Knowledge Base article, there is a bug in Mac OS X 10.5.6 that causes it to report no search results when searching against AFP servers other than Mac OS X 10.5, including Acronis Files Connect (formerly ExtremeZ-IP), Mac OS X 10.4 (Tiger), Mac OS X 10.3 (Panther), and Microsoft's now discontinued Services for Macintosh (SFM) on Windows 2000 or Windows 2003.