Disk

RAID が個別のドライブとして検出されます。

事例

Acronis ブータブルメディアが HP Smart Array B110i SATA RAID (PCI\VEN_8086&DEV_3a25 or PCI\VEN_8086&DEV_3b25)、B120i やB140i,  B320i を個別のドライブとして検出します。

原因

Acronis ブータブルメディアはHP Smart Array B110i/B120i/B140i/B320i SATA RAIDをサポートしていません(オープンソースのドライバではないため)。

解決法

企業が専有するドライバを製品に組み込むことが禁止されているため、Acronisブータブルメディアにドライバを追加することはできません。

Acronis製品がHP Smart Array RAID コントローラを検出しない場合は、以下の回避策を実施してください。

Do the following, if you want to back up individual disk/partitions or files/folders.

On a Windows computer

Acronis Backup & Recovery 11/11.5 is fully compatible with Aladdin Secret Disk. Other Acronis products have limited compatiblity

Acronis SharePoint Explorer: Extraction to functioning site or in SharePoint content migration package format fails with "Failed to create package file" or with empty message.

You can restore boot records, repair files and folder structure, find lost clusters, remove computer virus code from a disk and much more

Conversion of both basic to dynamic and dynamic to basic is performed without data loss.

Conversion of a dynamic system disk to basic will require a reboot.

Restoring to dissimilar hardware is not available on Mac (neither for OS X, nor for the Bootcamp partition).

Acronis Universal Restore is a free tool available for Acronis customers, which allows you to make the old system bootable on new hardware. This may be useful, for example, after replacing a failed motherboard or when deciding to migrate the system from one computer to another.

Restore to dissimilar hardware procedure:

Restoring to dissimilar hardware is not available on Mac (neither for OS X, nor for the Bootcamp partition).

Acronis Universal Restore is a free tool available for Acronis customers, which allows you to make the old system bootable on new hardware. This may be useful, for example, after replacing a failed motherboard or when deciding to migrate the system from one computer to another.

Restore to dissimilar hardware procedure overview:

Explanation of the difference between creating a backup and disk cloning

Symptoms

You receive an e-mail notification with backup log, containing one or multiple lines with "Volume Tracker has failed to find changes on volume..."

Example:

2018-12-20T09:00:10:378-04:00 10916 I000101F8: Pending operation 173 started: 'Creating partition image'.

 

2018-12-20T09:00:11:190-04:00 10916 I00100000: Volume Tracker has failed to find changes on volume '\\?\Volume{5e2aeab2-ffb3-4dab-8444-54635f6a3367}\'.

All conditions must be true:

  1. Act! software and Microsoft SQL Server are installed
  2. Acronis True Image does not create a backup. If you click the red exclamation mark at the center of the backup screen, the following error message is displayed:
    1. Entire PC and disk/partition backups: Unable to create volume snapshot
    2. File and folder backup: Failed to backup file or folder
  3. The last modified log file at C:\ProgramData\Acronis\TrueImageHome\Logs\ti_demon contains the following text: VSS writer 'SqlServerWriter' with class ID 'A65FAA63-5EA8-4EBC-9DBD-A0C4DB26912A' has failed to process the snapshot

Backup task fails with the following error:

There is not enough space on the destination drive to perform a backup

The Acronis Report collects information about the structure of partitions of your hard disk drives and the file system structure

On one operating system regular file-level or disk-level backups and Microsoft Exchange Server backup tasks are always queued and performed one by one by the service_process.exe process.

The tasks cannot be run simultaneously.

 

Introduction

This article describes how to set up Acronis True Image so that backups are saved to two or more external disks, which could be swapped or rotated on regular basis. For example, backup to disk A on even weeks and backup to disk B on odd weeks. The disk that is not used on a given week is usually kept in a different physical location as an extra layer of protection.

Skip to solution

Restoring to dissimilar hardware is not available on Mac (neither for OS X, nor for the Bootcamp partition).

Acronis Universal Restore is a free tool available for Acronis customers, which allows you to make the old system bootable on new hardware. This may be useful, for example, after replacing a failed motherboard or when deciding to migrate the system from one computer to another.

Restore to dissimilar hardware procedure overview:

The following versions of Acronis Disk Director support RAID arrays.

  • Acronis Disk Director 12.5
  • Acronis Disk Director 12
  • Acronis Disk Director 11
  • Acronis Disk Director 10

You can perform all available operations with partitions located on RAID volumes without any special precautions.

Check the disk for errors and install the latest driver update

If you have decided to replace the hard disk of your laptop with a new one, you can use Acronis True Image to do the cloning.

Acronis accepts hard disk drives of the following interface types:

  • SATA
  • eSATA
  • USB

The file system on the drive must be FAT32 or NTFS

(!) Please make sure you include all cables required to connect your drive to computer and power. Drives without cables and drives without standard power plugs (US or European) will not be processed. Make sure to ship a PSU if external power is required.

(!) SCSI, ATA, IDE and Ethernet drives are not accepted.

仮想コンピュータがオンのときには、仮想アプライアンスを使用して独立型ディスクをバックアップすることができません。

Independent disks cannot be backed up with the virtual appliance when the virtual machine is turned on

Introduction

Acronis Survival Kit is a simple all-in-one recovery tool for external drive backups based on Acronis Bootable Rescue Media. 

Introduction

Old backups are deleted automatically according to the rules defined in the backup options. Read "Automatic cleanup rules" section in the user guide: local backups, backups in Acronis Cloud.

The backup menu option "Delete", that has always existed in the program, removes a backup completely, with all of its versions.

Introduction

Acronis software may give errors, freeze or produce other undesired effects when there are issues with parts of the computer environment it operates in:

Hardware/Firmware

Disk partitions, file systems

Mapped drives are not listed/available in GUI (e.g. as the backup source/destination) or backup via acrocmd command line tool to a mapped drive fails.

ページ