All the communications between the components of the product are SSL-encrypted
Deploy
How to proceed with the issue when after successful deployment, the target system is being system patched on every reboot
How to collect Acronis OS Deploy Server operations log
This message can be safely ignored
How to collect Acronis Snap Deploy Agent operations log
Try reinstalling OS Deploy Server and switching from multicast to unicast to solve the issue
What to do in case you receive the error message stating that Acronis License Server cannot be found during the installation of Acronis OS Deploy Server
The system will be unbootable after deployment
This article describes the step-by-step procedure of deployment
There are server and workstation licenses of Acronis Snap Deploy 3
Change hard drive mode to SATA to resolve the issue
Remove Acronis Storage Node from Acronis Management Server and re-add it by IP address
Acronis Snap Deploy does not properly recognize Windows images with Bootmgr in the first sector of the partition
The issue is caused by different builds of Acronis Snap Deploy Agent and Acronis OS Deploy Server
Acronis Backup & Recovery 10 管理サーバーで、バックアップしたいすべての VMware ESX または ESXi サーバーの仮想コンピュータにエージェント for ESX/ESXi を簡単に配置することができます
この資料は、以下の製品に該当します。
This article describes the cases when a license is acquired from Acronis License Server
Brief description of Acronis Snap Deploy 3 for PCs and Acronis Snap Deploy 3 for Servers
The list of operating systems Acronis Snap Deploy 3 components work with
ここでは、Acronis ライセンスサーバーからライセンスが取得される状況について説明します
説明
次の場合に Acronis License Server からライセンスが取得されます。
- Acronis Snap Deploy 管理エージェントのインストール時
- コンピュータに初めてイメージを配置する場合
1 つのライセンスが割り当てられている 1 台のコンピュータには、イメージを個数や回数を問わず配置することができます。1 台のコンピュータに 1 つのライセンスを割り当てた後は、配置のたびに新しいライセンスを割り当てる必要はありません。
Acronis Snap Deploy 3 for PCs および Acronis Snap Deploy 3 for Servers について簡単に説明します
説明
Acronis Snap Deploy 3 for PCs |
Acronis Snap Deploy 3 for Servers |
What to do when only several computers are deployed successfully
Acronis Snap Deploy エージェントと Acronis OS 配置サーバーのビルドが異なっていることが原因です
この資料は、以下の製品に該当します。
この問題を解決するには、ハードドライブのモードを SATA に変更します
この資料は、以下の製品に該当します。
- Acronis Snap Deploy 3
事例
- Acronis ブータブルメディアまたは PXE サーバーから Dell Latitude E6410 または E6510 を起動します。
- Acronis Snap Deploy エージェントで起動するように選択します。
- 次のようなメッセージが表示され、製品が停止します。
Unable to load Linux Kernel(Linux カーネルを読み込めませんでした)
Unable to load initial ramdisk(初期 Ramdisk を読み込めませんでした)
原因
製品に問題があります。Acronis Snap Deploy 3 は、RAID モードのコンピュータのハードディスクを検出できません。
Acronis Backup & Recovery 10 Management Server provides an easy way to deploy Agent for ESX/ESXi to every VMware ESX or ESXi server whose virtual machines you want to back up
コンピュータのイメージを、異なるハードウェア
の別のコンピュータに配置するには、Acronis Universal Deploy を使用する必要があります
この資料は、以下の製品に該当します。
- Acronis Snap Deploy 3 for PCs
- Acronis Snap Deploy 3 for Servers
はじめに
Acronis Universal Deploy を使用すれば、コンピュータのシステムイメージを、異なるハードウェアの別のコンピュータに配置することができます。
Restart Acronis Remote Agent or perform installation under Administrator
This has been fixed
Acronis 管理サーバーから Acronis ストレージノードを削除し、IP アドレスを使用して再追加します
この資料は、以下の製品に該当します。
This has been fixed
修正済みの問題です
この資料は、以下の製品に該当します。