Controller

If Primary Domain Controller of Windows 2000/2003 Active Directory goes down and Backup Domain controller automatically takes over, then Active Directory will be out of Sync after Primary Domain Controller is restored from a backup

The driver does not work with customized Linux kernel, which is used in Acronis products. This is applies to all Promise FastTrak controllers that have Vendor ID 0x105a

The recommended way of using Acronis Universal Restore to migrate Active Directory with Domain Controller to a new machine with dissimilar hardware

この問題は修正済みです。

この資料は、以下の製品に該当します。

  • Acronis Backup & Recovery 10 Advanced Server Virtual Edition(エージェント for ESX/ESXi)

事例

  1. 仮想アプライアンスを使用して Windows Server 2008 仮想コンピュータをバックアップします。
  2. その後で仮想アプライアンスを使用して新しい仮想コンピュータとして復元します。
  3. 復元されたシステムは起動できなくなります。

    Status:0xc0000225
    Info:The boot selection failed because a required device is inaccessible.

This has already been fixed. The fix is available in the latest build of the product

すでに修正済みの問題です。この修正は本製品の最新ビルドに反映されています

この資料は、以下の製品に該当します。

Slow data transfer speed in Windows, possible reasons and workarounds

Changing RAID configuration (e.g. RAID-1 to RAID-5) without changing RAID controller does not require using Acronis Universal Restore

This article describes, how to install Acronis Backup successfully on a Microsoft Windows Read-Only Domain Controller.

Before installing the product on a read-only domain controller (RODC), log on to the primary (writeable) domain controller and perform one or more of the following steps, depending on which components you are installing on the read-only domain controller:

Advanced Host Controller Interface (AHCI) is a hardware mechanism that allows software to communicate with Serial ATA devices and allows the storage driver to enable advanced Serial ATA features.

Acronis products support AHCI drives in Windows and in Acronis Bootable Media. There is no need to add special drivers for AHCI support.

For more information on AHCI technology please see Intel: what is Advanced Host Controller Interface?.

Symptoms

  1. You are installing Acronis Disk Director 11 Advanced on a read-only domain controller (RODC);
  2. The installation fails;
  3. In the installation log there is a message similar to the following one:
    • If you selected to use an existing user for Acronis services:

      AddUserToLocalGroup: add user 'DOMAIN\administrator' to the group ''Backup Operators' failed with error '' (1313720)

The reason is that the backup was created with disabled VSS support

Symptoms

  1. You are installing Acronis Agent for Windows on a read-only domain controller (RODC);
  2. The installation fails;
  3. In the installation log there is a message similar to the following one:
    • If you selected to use an existing user for Acronis services:

      AddUserToLocalGroup: add user 'DOMAIN\administrator' to the group ''Backup Operators' failed with error '' (1313720)

修正済みの問題です

この資料は、以下の製品に該当します。

RAID が個別のドライブとして検出されます。

事例

Acronis ブータブルメディアが HP Smart Array B110i SATA RAID (PCI\VEN_8086&DEV_3a25 or PCI\VEN_8086&DEV_3b25)、B120i やB140i,  B320i を個別のドライブとして検出します。

原因

Acronis ブータブルメディアはHP Smart Array B110i/B120i/B140i/B320i SATA RAIDをサポートしていません(オープンソースのドライバではないため)。

解決法

企業が専有するドライバを製品に組み込むことが禁止されているため、Acronisブータブルメディアにドライバを追加することはできません。

Acronis製品がHP Smart Array RAID コントローラを検出しない場合は、以下の回避策を実施してください。

You are reporting a typo in the following text:
Simply click the "Send typo report" button to complete the report. You can also include a comment.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
11 + 7 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.