There are limitations on Acronis Migrate Easy compatibility with Norton GoBack

Default settings for transferring partitions from an old hard disk drive to a new larger hard disk drive in the automatic transfer mode of Acronis Migrate Easy

The Total Progress bar start from 50% and progresses to 100%

How to copy a partition to the same or a different hard disk drive

The way data integrity is handled during data transfer to a new hard disk drive

Reactivate Linux loader after the cloning

Acronis Migrate Easy allows you to resize partitions during cloning

How a Windows XP, NT, 2000 or Server 2003 system can be prepared for cloning to different hardware

There is no way to create new partitions that did not exist on the original hard disk drive with Acronis Migrate Easy during disk cloning

This is normal behavior if you boot Windows with both the source and the cloned drive attached

Acronis Migrate Easy 7.0 を使用すると、ハードディスクドライブのクローンを別のハードディスク上に作成することができます。クローン作成元のハードディスクドライブのサイズが、クローン作成先のハードディスクドライブと異なる場合、クローン作成の際に既存のパーティションのサイズを変更することができます。


Acronis Migrate Easy 7.0 を使用すると、古いハードディスクドライブのクローンを新しいハードディスクドライブに作成することができます。パーティションは、サイズと場所を現状のまま維持するか、任意のサイズに変更するか(最大でパーティションに実際保存できるデータの大きさまで)を移行の際に選択することができます。つまり、クローン作成元のディスク上のデータが 80 GB 未満であれば、100 GB のディスクから 80 GB のディスクへの移行が可能です。

Acronis Migrate Easy 7.0 では、わずか数分でシステムに新しいハードディスクドライブを追加してパーティションを作成することもできます。

Windows XP、NT、2000、または Server 2003 システムで別のハードウェアにクローンを作成する場合の準備方法







Windows のネイティブモードでアクロニス製品が再起動されますが、クローン作成または復元が実行されずに数秒で終了します


You can clone basic disks from Acronis Bootable Media, or from your operating system

You can clone basic disks from your operating system or from Acronis Bootable Media

After you clone a backup task, rename it to avoid confusion on the software side

You can back up a disks or volumes in Windows, and restore disks from Acronis Bootable Media or volumes in Windows. The "Clone" operation is not supported

How to clone backup task settings in True Image 2013 by Acronis.

It is recommended to clone the disks from Acronis Bootable Media

Acronis Migrate Easy 7.0 lets you clone one hard disk drive to another. Should the size of the source hard disk drive differ from the target hard disk drive, exisiting partitions can be resized during the process of cloning.

It is recommended to clone the disks from Acronis Bootable Media

Acronis product reboots in Windows Native Mode, but the cloning or restore process finishes in a few seconds with no result

As a user you are responsible to have the necessary third party software licenses when deploying, cloning, restoring or in any other way transferring operating systems or applications

If the capacity of the cloned drive is the same with original drive, whereas it should not be, then the issue is caused by Host Protected Area

Restart the system manually

This article applies to:

  • Acronis True Image 2015

It is recommended to clone the disks from Acronis Bootable Media

Using Acronis True Image, you can transfer a system from IDE to SATA hard disk and vice versa

Using Acronis Disk Director 11 you can clone basic MBR disks.

Source disk volumes can be cloned to the target disk "as is" or resized proportionally.

It is recommended not to format the source hard disk after cloning until you are sure that the cloned target disk boots fine.

(!) Only basic disks can be cloned with Acronis Disk Director 11: