Restoring an image of Windows XP Embedded with Acronis Universal Restore to dissimilar hardware will most likely result in unbootable system
AUR
This article describes how to remove unused drivers that are not shown in Device Manager
Acronis True Image Echo has the capability to convert a disk/partition image (.tib) to a virtual disk file of the type you select (.vmdk, .vhd, .hdd).
As a workaround, select "Volumes" to restore
This prompt can be safely skipped
The component supports recovery of Windows XP, Windows Vista and Windows 7
64-bit systems can only run on 64-bit-compatible hardware
To create BartPE media with Acronis Universal Restore you will need to have Acronis True Image, Acronis Universal Restore and PE builder
Acronis Universal Restore is not available when restoring from Nonstop Backup storage
This prompt can be safely skipped
Acronis True Image Echo には、ディスクまたはパーティションイメージ(.tib)を、選択した種類の仮想ディスクファイル(.vmdk、.vhd、.hdd)に変換する機能があります。
この資料は、以下の製品に該当します。
This is either a false warning or a known issue with Build 12497
このメッセージは間違った警告か、ビルド 12497 における既知の問題かのいずれかです
この資料は、以下の製品に該当します。
Acronis Universal Restore is included in Acronis Backup & Recovery 10 Advanced Server Virtual Edition by default, no separate license is needed
Acronis Universal Restore is included in Acronis Backup & Recovery 10 Advanced Server SBS Edition by default, no separate license is needed
Restart Acronis Remote Agent or perform installation under Administrator
64 ビットシステムは、64 ビット互換ハードウェア上でしか実行できません
事例
- Acronis Universal Restore を使用して、64 ビットオペレーティングシステムのイメージを新しいハードウェアに復元します。
- 復元後、次のようなエラーメッセージが表示されて、コンピュータを起動することができません。
Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode
Acronis Universal Restore をインストールする前に Acronis Backup & Recovery 10 をインストールしてください
この資料は、以下の製品に該当します。
Acronis Backup & Recovery 10 must be installed before installing Acronis Universal Restore
You need to collect restore operation log and save it to an external/flash drive, a network share or a floppy disk
Table of operating systems supported by older Acronis products
Changing RAID configuration (e.g. RAID-1 to RAID-5) without changing RAID controller does not require using Acronis Universal Restore
How to use Acronis Universal Restore without recovery to fix operating system bootability
This article applies to:
- Acronis Backup 11.5 (Acronis Backup & Recovery 11.5) up to Upgrade 5
- Acronis Backup & Recovery 11
You need to use Acronis Universal Restore to recover the system backup of one machine to another one with dissimilar hardware
It recommended to use Acronis Universal Restore to deploy the image of a Windows system to a machine with different hardware
コンピュータのシステムバックアップを、異なるハードウェアの別のコンピュータに復元するには、Acronis Universal Restore を使用する必要があります。
この資料は、以下の製品に該当します。
Windows システムのイメージを異なるハードウェアに展開する際は、Acronis Universal Restore をご使用されることをお勧めします
この資料は、以下の製品に該当します。
異なるハードウェアへの復元ガイド
この資料は、以下の製品に該当します。
Acronis True Image 2015
説明
異なるハードウェアへの復元手順:
Sysprepで準備されたシステムに対して、Acronis Snap Deploy は、SID、DNS名、コンピュータ名、ドメイン及びワークグループのメンバーシップを生成できません。また、Acronis Universal Restore も使用できません。
Acronis Snap Deploy cannot generate SIDs, DNS or computer names, domain or workgroup memberships, or apply Acronis Universal Deploy to a system prepared with sysprep