AB - Backup

ファイルレベルのバックアップに失敗した場合のトラブルシューティング

本記事の対象製品:

  • Acronis Backup (Acronis Backup & Recovery)

 はじめに

まず、ファイルレベルのバックアップのときにだけ発生する問題かどうか確認してください。そのために、以下の条件を満たしてディスクレベルのバックアップを実行してください:

  • 同じソース(例えば、C:ドライブの完全なバックアップ)
  • 同じバックアップ先(例えば、同じフォルダへ)
  • 同じ設定(例えば、VSSなど)

その結果、ディスクレベルのバックアップに成功した場合、発生した問題はファイルレベルのバックアップの問題だと分かります。この場合、[既知の問題]に移動してください。 

しかし、ディスクレベルのバックアップにも失敗した場合、発生した問題は一般的な問題です。この記事の加入情報を参照してください。

Troubelshoot tape usage issues

This article applies to:

  • Acronis Backup Advanced

Introduction

Acronis Backup Advanced provides advanced capabilities in setting up tape storage and using it for backup and replication. Incorrect settings and usage may lead to unexpected results and problems. This article describes the Tape Management functionality, settings, contains correct and incorrect usage examples and provides troubleshooting steps for issue resolution.

MS Exchange のクラスタ、データベース・メールボックス・フォルダ・電子メールの検出に関する問題をトラブルシュートする方法

本記事の対象製品:

Acronisスケジューラに関する問題の切り分け方法と解決法

  • Acronis Backup & Recovery 10
  • Acronis Backup & Recovery 11
  • Acronis Backup 11.5 (Acronis Backup & Recovery 11.5)
  • Acronis vmProtect 8
  • Acronis vmProtect 9
  • Acronis True Image 2015
  • Acronis True Image 2014
  • True Image 2013 by Acronis

 

概要

Acronisスケジューラは、スケジュールされたAcronisタスクを管理するツールです。バックアップ計画やタスクでスケジュールされたバックアップが設定した通りに実行されない場合は、以下の方法に従い事象の切り分けを行い、根本原因を特定し、可能な場合は問題を解決します。

カタログ作成の問題を解決するために、以下の手順に従ってください:

  1. カタログ作成の技術の説明 を確認します。
  2. 既知の問題 で、既に知られている問題かどうか確認します。
  3. 問題を解決するために、 トラブルシューティング に移動します。

Expand All / Hide All

メール通知に関する問題を解決するために、以下の手順に従ってください:

  1. メール通知の技術については、説明 で確認します。
  2. 既知の問題 で、既に知られている問題かどうか調べます。
  3. 問題のトラブルシューティングを行い、解決するために、トラブルシューティング の説明に従います。

メール通知について

メール通知は、様々な情報(操作結果、対話、警告など)を電子メールに送信するために使われます: 

  • 操作結果: バックアップの成功・失敗など 
  • 対話: 操作中、ユーザーとの対話が必要になる場合
  • 警告

詳細については、以下の記事をご参照ください:

OSのクラッシュ(異常終了)をトラブルシュートする方法

本記事の対象製品:

  • Acronis ソフトウェア

はじめに

Acronis 製品はオペレーティングシステムのストレージシステムを非常に低レベルで扱いますから、このレベルでの様々な競合によってバックアップ(または、他の操作)中にオペレーティングシステムがクラッシュする僅かなリスクがあります。クラッシュをトラブルシュートするには、使用するOSによって以下の手順のいずれかに従ってください。

ソリューション

これらのクラッシュはいつも低レベルのシステム競合によって発生するので、一般的なソリューションがありません。各クラッシュは、個別に調べる必要があります。クラッシュをトラブルシュートするには、以下の手順に従ってください。使用するシステムによって手順が異なりますので、まずは適切なセクションを選んでください: 

This article provides instructions on how to troubleshoot and resolve issues with backup failures of Microsoft Exchange Information Store while using Acronis Backup Advanced.

Solution

Follow these steps to troubleshoot issues with Backup of Microsoft Exchange Information Store:

Follow these steps to troubleshoot issues with single-pass backup of SQL Server databases:

Expand All

Instructions on how to troubleshoot and resolve issues with disk/partition backup failures

Introduction

Backup of drives or partitions may fail due to a variety of reasons, but not all reasons are specific to this type of backup. Generally the problem can be treated as a partition backup failure only when you also tried to run a file backup

This article provides information on troubleshooting possible failures during Deduplication.

Deduplication is a complex process involving many operations and components and thus has a number of possible points of failure. In order to properly troubleshoot and resolve such issues, the first step is to find the exact point of failure. Once this clear, we have to collect the proper diagnostic information. Please follow the guide below in order to do this.

Select the situation that applies:

Exclude Acronis program folders, executable files and program data from the antivirus check.

Instructions on how to troubleshoot and resolve vSphere snapshot issues in Acronis Cyber Backup products

Expand All / Hide All

This article applies to:

Continuous Data Protection (CDP) backup scheme allows reverting the protected data to any point in time.

Follow these steps to troubleshoot CDP Backup Failure:

Introduction

Make sure that your problem appears during file-level backup only. This is the case if you also tried to run a Disk level backup

  • of the same source (e.g. backup of the whole C: drive)
  • to the same destination (e.g. to the same folder).
  • with the same backup settings (VSS, etc)

and in the result the disk level backup worked. In this case check for known issues.

Instructions on how to troubleshoot and resolve issues with tape devices.

This article applies to:

The Express Full Backup method allows creating full backups of Exchange information stores, storage groups, or databases in deduplicating vaults. With this method, Acronis software backs up only the changes that have occurred since the previous full backup. The data that has not changed is replaced with links to it in a newly created backup.

Follow these steps to troubleshoot Express Backup Failure:

This article provides instruction for troubleshooting virtual machine backup failures in Acronis Cyber Backup virtualization solutions.

Solution

Follow these steps to troubleshoot virtual machine backup failures:

When configuring Acronis Backup Advanced for Exchange for backup or recovery operations, you may encounter issues with detection of the Exchange Server cluster components or data.

Follow these steps to troubleshoot detection issues:

Because Acronis products work with the storage system of an operating system on a very low level, there is a small risk that different conflicts on this level can lead to an operating system crash during backup or other operations. Please follow the instructions below to troubleshoot these issues, depending on what operating system is being used..

Follow these steps to troubleshoot a Cataloging Issue

Collect information for investigation of Linux operating system lockups.

Operating system may hang under specific circumstances. To identify the exact cause, it is necessary to analyze Acronis System Report and a kernel dump.

Always make sure you have the latest build of the product (if it's possible).

Make sure that the antivirus software running in your environment does not block Acronis products. See Acronis Software: Making Acronis Products Compatible with Antivirus Software

Under specific circumstances, the software may crash. It is very important to report a crash instead of trying to workaround it. Normal workflow for a crash problem is the following:

While using the VSS backup option to back up complex applications, you may encounter issues with creating volume snapshot/shadow copy. This article provides instructions on how to troubleshoot and resolve such issues.

Product may hang under specific circumstances.

There are 2 types of hanging:

  • Actual hanging. That is a state similar to a crash. That means that software halts and is doing nothing inside.
  • Infinite loop. This means that on the outside the software looks hanging but inside it is doing some actions over and over again.

Usually when a software hangs its process uses either 100% of CPU (especially when it is infinite loop) or does not use CPU and does not change RAM usage at all (Actual hanging). Still it is difficult to make sure if the software hangs or not. The above means that usually 1 dump is not enough because if that is Infinite Loop – the developers will see that software is working and there is no problem inside. So in order to troubleshoot application lockups you need about 5 dumps collected one after another. A Process Monitor Log will also be useful especially if it actually turns out to be an Infinite Loop.

Please note that an application lockup does not necessarily mean the software is completely unresponsive. A process can hang (e.g. service_process.exe hangs and a backup is stuck), but you can still browse vaults, create new plans etc.

Define the hanging process using Windows Task Manager. In some cases multiple processes are involved in an operation. In this case the hang of 1 process can be caused by some operations in another process. In this case you need  to collect memory dumps of all processes involved in the operation. E.g. if a backup to Acronis Storage Node hangs, you need to collect a dump of service_process of the agent as well as StorageServer.exe process on ASN machine.

Acronis Scheduler is a tool which is responsible for scheduled Acronis operations. If scheduled backups or other activities do not work as configured in backup plan or task, proceed with this article in order to identify the root cause and solve the issue if possible.

Follow these steps to troubleshoot Acronis Scheduler issues:

About

Pre-/Post-Backup or Pre/Post data capture commands can be used for various operations such as: