Linux-based bootable media

Symptoms

When trying to create a bootable media on a stick with more than 32 GB capacity you get an error message "Media cannot be formatted" or bootable media is created, but the system does not boot from it.

After installation of Acronis vmProtect 9 Virtual Appliance onto ESXi 5.5 host upgrade its virtual hardware up to 10th version in order to avoid "The specified delta disk format 'redoLogFormat' is not supported." error in the log

Wenden Sie sich an den Acronis-Support, um eine Lösung zu erhalten.

Dieser Artikel ist gültig für die Produkte:

  • Alle Acronis-Produkte

(!) Wenn das Produkt die Festplatten unter Windows nicht erkennt, finden Sie weitere Informationen unter Acronis Product Does Not Detect Hard Disks in Windows.

You can boot the machine from Acronis Bootable Media and manage it locally or remotely

This article explains the general concept of archives and backups as realized in Acronis Backup & Recovery, and how one can resume previous backups into the same archive

Create two separate tasks if you are planning to back up local and network folders

To restore from an unmanaged vault, browse to the network share or local folder where the archive is. To restore from a centralized managed vault, click on Storage node, type in the IP Addres or computer name of the machine where Acronis Storage Node is

Acronis Backup & Recovery 11/11.5 is fully compatible with Aladdin Secret Disk. Other Acronis products have limited compatiblity

An Update is available for True Image 2013 and Acronis Backup & Recovery 11.5

Acronis Bootable Agent can be controlled either locally through the GUI or remotely using the console

Symptoms

  1. You are trying to make a standalone deployment of an image placed on an external HDD to default disk.
  2. Deployment fails with:

E00770022: Deployment has completed with errors.
Failed to prepare to the image deployment operations. Possibly, image is corrupted or is not accessible.

Error code: 0x330022
$module = "stand_alone_glx_1416"
Tag: 0x100FE7C3207C546D
Internal error: Failed to create the image stream reader.

Symptoms

  1. You have a machine with Intel I219-LM NIC.
  2. You boot the machine with Acronis Linux-based bootable media.
  3. The NIC is not detected, you cannot configure network settings.

Cause

Limitation of the product.

Solution

The issue has been fixed in update 1 of Acronis Backup Advanced 11.7, please update to the latest build.

The issue has been fixed in update 3 of Acronis Snap Deploy 5, please update to the latest build.

Symptoms

  1. You create a 64-bit WinPE-based bootable media by specifying a path to a folder with WinPE files manually (e.g. C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\en-us\winpe.wim).
  2. You boot the target machine with the created media.
  3. Booting fails with the following error:

The operating system couldn't be loaded because a critical system driver is missing or contains errors.
File: \windows\system32\DRIVERS\snapman.sys

Download an ISO image from the Acronis website, burn it to a CD/DVD, and issue a special command to get the proper screen resolution

Die neue Festplatte, auf die Sie die ältere klonen, sollte sich während des Vorgangs im Laptop befinden.

Einführung

Wenn Sie sich entschieden haben, die Festplatte Ihres Laptops durch eine neue zu ersetzen, können Sie die Backup-Software von Acronis zum Klonen verwenden.

Description

Acronis Disk Director (any version and edition) is not supported on Mac computers.

This includes:

  1. Installing and using Acronis Disk Director on macOS (any version)
  2. Installing and using Acronis Disk Director on BootCamp Windows
  3. Installing and using Acronis Disk Director on Parallels Windows or any other virtual machine on Mac computer
  4. Running Acronis Disk Director from a bootable media on Mac and any virtual machine on it

Introduction

You can create a Linux-based or WinPE-based media using Bootable Media builder in the product: see Acronis Backup 12.5: how to create a bootable media

Make sure to specify a licence key during bootable media creation, otherwise backup will not be available.

Solution

 

  1. Boot from Acronis Bootable rescue media

Introduction

This article explains how to find out whether Acronis Bootable Media boots in UEFI or Legacy BIOS mode. Keep in mind that bootable media should boot in the same mode as your system to correctly perform restore or clone operation.

The mode your system boots in is shown during the initial machine boot:

In Windows 8 and 10, you can also check the boot mode using System Information:

You can create a rescue bootable media - a standalone version of Acronis True Image that you can use to boot a crashed machine or a machine without any operating system and restore an image of your system. Follow these instructions to create a bootable media.

Software kann unter bestimmten Umständen abstürzen. Es ist sehr wichtig, von einem solchen Absturz einen Bericht zu erstellen, als zu versuchen, eine Möglichkeit zur Umgehung des Problems zu finden. Der normale Ablauf bei einem Absturzproblem sieht folgendermaßen aus:

Introduction

This article instructs how to use Acronis True Image to recover Windows from a boot failure.

Use the present article only if the system is damaged to a state when you can't get to the Desktop screen and launch Acronis True Image normally. If you are able to access Acronis True Image within running Windows, please follow instructions from that article instead.

The full version of Acronis Bootable Rescue Media uses Linux environment, the naming convention of which is different from Windows

Contact Acronis Customer Central for a resolution

Because Acronis products work with the storage system of an operating system on a very low level, there is a small risk that different conflicts on this level can lead to an operating system crash during backup or other operations. Please follow the instructions below to troubleshoot these issues, depending on what operating system is being used..

In some rare cases there can be some issues with HID devices, e.g. you booted machine from Bootable Media and your USB mouse doesn't move or keyboard doesn't type or types wrong. Follow step-by-step instructions below to troubleshoot the issue.

Symptoms

You may experience issues with booting a Linux-based bootable media on MSI GE72VR 6RF notebook. Agent locks up while 'Loading the network connection setting...'

Solution

Issue can be resolved by adding the acpi=off noapic parameter to the Linux kernel when creating the media:

Symptoms

  1. You create a WinPE bootable media and specify network settings manually.
  2. Manual network settings are ignored; media is configured with DHCP settings.

Cause

Issue in the product.

Solution

Our development is working on the issue. This article will be updated as soon as the fix is available.

Seiten