Windows

Attribute ID: 7 (0x07)

Hard drives, supporting this attribute

Samsung, Seagate, IBM (Hitachi), Fujitsu, Maxtor, Western Digital

Description

Seek Error Rate S.M.A.R.T. parameter indicates a rate of seek errors of the magnetic heads. In case of a failure in the mechanical positioning system, a servo damage or a thermal widening of the hard disk, seek errors arise.

Attribute ID: 9 (0x09)

Hard drives, supporting this attribute

Samsung, Seagate, IBM (Hitachi), Fujitsu, Maxtor, Western Digital

Description

Power-On Hours (POH) S.M.A.R.T. parameter indicates a count of hours in power-on state. The value of this attribute shows total count of hours (or minutes, or seconds, depending on manufacturer) in power-on state. A decrease of this attribute value to the critical level (threshold) indicates a decrease of the MTBF (Mean Time Between Failures).

Attribute ID: 1 (0x01)

Hard drives, supporting this attribute

Samsung, Seagate, IBM (Hitachi), Fujitsu, Maxtor, Western Digital

Attribute ID: 4 (0x04)

Hard drives, supporting this attribute

Samsung, Seagate, IBM (Hitachi), Fujitsu, Maxtor, Western Digital

Description

Start/Stop Count S.M.A.R.T. parameter indicates a count of hard disk spindle start/stop cycles.

Each hard disk has its own limited number of these cycles depending on manufacturer. The maximum number of spinups/spindowns is called a threshold. When the parameter’s value drops down to the threshold, it means a hard disk is unhealthy.

If Acronis Management Server is installed on a guest operating system, which is backed up from the host, it will not display the correct task status on the dashboard

Acronis Backup and Security 2010 does not overwrite the existing installation of usual Acronis True Image Home 2010 version with its own modified version of Acronis True Image Home 2010

Acronis True Image Home 2010 is already included in Acronis Backup and Security 2010

Run the installation file, reboot the machine to finish the installation, enter the license key

Remove the grayed out machines from Acronis Management Server and then add them back to solve the issue

The location of your backup archive has changed or is unavailable

Acronis Backup & Recovery 10 can only back up to the root of Iomega REV drive.

Edit the archive.xml file to have the protection alert refreshed

As a workaround, uninstall the components that fail from Control Panel, and install them back using the installation file of build 11639.

Allow "System" rule 35 for Remote Desktop access

Firewall protects your computer from hacker and malicious outside attacks

Acronis True Image Home 2010 is already included in Acronis Backup and Security 2010

A script to delete vaults from Acronis Management Server if the attempt fails through GUI

As a workaround, install the Acronis Management Console from Windows command-line

As a workaround, do not attach the database. The database file will be recreated

Seiten