This article applies to:
- Acronis MassTransit
Do the following to change the MassTransit configuration to use a different IP address.
If you have to change the IP addresses on your system, you need to edit the Transporter settings in the MassTransitEngine.cfg and MTTransporter.ini files - see details here.
If you have multiple IP address you need to check which IP is supposed to be used by using the method outlined in this guide.
If you have multiple IP addresses and you are using a web enabled version of MassTransit you should also make sure that you have it MTWeb set properly for a multihomed system (see details here) and you should also modify the MTAP_OUTGOING_IP_ADDRESS setting (see details here).